10.0.0.0.1 – Admin Router Login

10.0.0.0.1 is a Class A IP address, which is only reserved for private networks. 10.0.0.0.1 is the default IP address for the Xfinity Comcast Routers. 192.168.1.1, 192.168.0.1, 192.168.1.0 are other reserved IP addresses that are commonly used. The IP address 10.0.01 is in the private network 24-bit IP block, which consists of 16,777,216 ranging from 10.0.0.1 to 10.255.255.255.

10.0.0.0.1 is the first IP address in the 10.0.0.1/24 private subnet with 255.255.255.0 Subnet mask which covers IP addresses ranging from 10.0.0.1 to 10.0.0.255. These subnets are used on smaller home networks. Many people often mistake the 10.0.0.1 with 10.0.0.0.1, so make sure you don’t do that mistake. 

What to do with the 10.0.0.0.1 Login

As I mentioned earlier, all the routers have their default IP addresses depending on your router brand and model number. 10.0.0.01 is the default address for Xfinity Comcast routers, so you can log in to Comcast using http://10.0.0.1 IP address.  So these Ip addresses are called Host addresses because they host all the data and settings related to the router.

You can access to the following settings when you do 10.0.0.0.1 Login.

  • Network management settings like WLAN, WAN and LAN Settings.
  • DSL
  • MAC
  • PPPOE
  • IP QoS
  • WPS
  • DHCP Client
  • DSL
  • DNS and Proxy
  • All other networking settings like encryption and passwords.

You need to login to 10.0.0.1 to access all these settings. You can even change your username and password, change Wifi name and password, etc. 

How to 10.0.0.0.1 Login | Login to Xfinity Comcast Router

10.0.0.1 IP address works for all the Xfinity Comcast routers, If you have a different router, make sure you have the default Ip address right. 

  • Make sure your PC is connected to the internet, let be Wired connection or wireless connection.
  • Open any web browser on your computer.
  • In the Url bar, enter https://10.0.0.1/  or default address of your router, if you have a different address. Look at the sticker on the back of the router, if you don’t know your router’s host address.
  • Now the once the Xfinity Login page is open, enter your username and password.
  • Now you can access all the settings of your router, You can change your router’s username and password. Also, protect your wifi with a password and also monitor who all are using your internet connection.

If you’re not able to Open 10.0.0.0.1 or unable to login to Xfinity Router, Follow the instructions below.

Unable to open 10.0.0.0.1

If you’re not able to open http //10-0-0-1, it might be due to the following reasons.

  • You might be entering the wrong IP address, Copy (http//10.0.0.1) and paste it in the web browser to try again. As I said earlier, many people mistake 10.0.0.1 for 10.0.0.0.1 which is not a real IP address.
  • Check if you connected to the right wifi, nowadays there are so many wifi’s around one might easily get confused when connecting to wifi.
  • If the router is working fine and you have connected to the wifi but you still can’t access  10.0.01 it means, the IP address might be different for your router. Check the sticker below the router and enter that ip address in the url bar and try again. If you don’t see any sticker or if that ip is not working, check below for more information.

Find your Router’s Default IP address

We need to Login to our router’s to configure or change any settings. We need the default IP address for us to access the web-based login page. Make sure you’re connected to the Internet before doing this, let be a wired or wireless connection. If you don’t have a Wifi setup already, use Ethernet cable and try the common default IP addresses. 10.0.0.1, 10.0.0.0.1, 192.168.1.1, 192.168.0.1 etc are some of the common IP addresses. These  IP addresses should work for you, if not you should check out our list of “Default Router’s IP addresses”. We have included all the router brands which are available across the world. Make sure you look with your Model number, sometimes the IP address might be different for each model although its from the same brand.

List of some router’s that use 10.0.0.1

Here’s the list of few routers which use 10.0.0.0.1 as their default host address.

  1. Xfinity Comcast Router
  2. Aris TG1682G router
  3. Netcomm N3G9W router
  4. Lucent AS-2000 router
  5. Alfa AP51 router 
  6. Aztech NA8300 router

These are only some of the routers which use 10.0.01 if your router is not in the list, that doesn’t mean 10.0.0.1 is not gonna work for you.

If you were able to open 10.0.0.1 Login page but not able to login or don’t know your default username and password, check the instructions below.

Unable to login to 10.0.0.0.1

Make sure you have entered the right username and password, If you don’t remember your Username and Password, look below your modem or router for the default user id and password. If you don’t find any, Checkout our list of default Usernames and Passwords.

Reset your web browser to default settings, doing this will clear all the cookies, history and settings on your browser. Sometimes cookies and things like browser extensions block some webpages, so reset the browser and try Logging in again. 

If that doesn’t work for you, the final fix is to reset your router. Look for the reset button on your modem, press and hold the button with a toothpick or a needle for 10-15 seconds, until it reboots itself.

Once, you the router is reset, now you can Login to 10.0.0.1 to access your router settings. Use the default username and password to login to your router. If you forgot or don’t remember your router’s username or password, follow the steps below to recover Username and password.

Recover Xfinity Router’s Username and password

If you forgot your router’s username and password or you don’t know the default username and password, look for the sticker on the router. The sticker on the router has all the details including default IP address, username, and password, Mac address, etc.

But in order to do Xfinity Comcast Router Login, you need to reset the router. Once, the router is reset you can open 10.0.0.1 on your web browser and login using default username and password. If you can’t find your router’s default username and password, check out our “List of Default Passwords”.

If you still have 10.0.0.0.1 Login problems or any other issues, Let me know in the comments below.

Leave a Comment